Reverse Osmosis (RO) systems are the best solution for drinking clean, healthy water. Improve the taste. Remove the nasties like lead, chlorine, fluoride, nitrates, arsenic, PFOAs, and PFOSs.
Aqua Flo HERO Reverse Osmosis System
The Aqua Flo HERO RO System by Hydrotech produces fabulous drinking water. It wastes virtually no water with over 99.9% recovery. Purified water is collected in the storage tank. Rather than sending the remaining rinse water to drain, it is recycled back where it will be used throughout the house.
Comparable systems typically waste 4-12 gallons for every gallon of RO water produced.
This makes it the perfect drinking water system for anyone on a private well or on municipal systems where water conservation and metering are of concern.
Aqua Flo QCRO Reverse Osmosis System
The Aqua Flo QCRO System by Hydrotech produces fabulous drinking water. It can be configured to meet your specific requirements. There are ten (10) interchangeable filters with a variety of treatment options. These can be tailored to local water conditions so your water is always the best it can be.
The QCRO’s innovative twist and lock design makes service simple. Twist off the old cartridge and twist on the new. No messy sump removal.
The QCRO is IAPMO R&T certified for the reduction of PFOA/PFOS, lead, and other harmful contaminants from water.
The quality of our drinking water increasingly coming under question. People are now looking for alternative sources of quality water. Hydrotech’s Aqua Flo Economy RO System provides the most convenient and economical solution. It stores neatly under the counter or can be installed remotely. This economically-priced RO Drinking Water System provides you with clean and delicious water right from its own dedicated tap. Also available with a performance-enhancing booster pump.
The H3500 RO System filters water from chlorine, sediment, and other particles, for high quality drinking water for you and your family. Designed with multi-stage filtration and permeate pump.
RO Storage Tanks
Increase system storage and increase flow rates with a larger tank. Regularly filling up 18-litre jugs in the home or for the cottage? Speed up your fills with a larger tank.
Tanks are NSF approved under standard 58 and CE approved under the PED (pressure equipment directive).
Two sizes to choose from:
92372 PRO-11 Capacity: 41.6 litres/11 gallons D: 14.97″ x H: 21.2″
92373 PRO-20 Capacity: 71.7 litres/20 gallons D: 14.97″ x H: 28.8″
RO Demand Pump
Regularly filling up 18-litre jugs in the home or for the cottage? Have two or more RO dispensing points, like a kitchen spigot and an icemaker? Speed up your fills and flow rates with an Aquatec 5800 demand pump. They are designed to operate intermittently, but most versions can run continuously for several hour intervals. The pumps can be operated in demand mode controlled by an integral pressure switch, or in delivery mode controlled by an external power switching device. An integral bypass may be used to limit pressure.
POWER: 115V PSI: 60 GPM: 0.9
MOUNTING: A steel mounting base with four hollow rubber grommets is standard and included at no extra cost. The pump may be mounted in any position.
FITTINGS: The 5800 pump is offered with integral John Guest style quick connect fitting for 3/8” OD semi rigid tubing.
WARNING: These pumps are amazing and will fill an 18-litre jug quickly, but they can be loud.